Lenze has cut down the price and difficulty from vector-based motor control by launching SMVector IP31 Range of Inverter Drives. This inverter Lenze drive range offers quick dynamic torque reaction, complicated auto-tuning, and a remarkable low-speed process from a compact, minimum price, and comprehensible package. The Lenze Drive SMVector IP31 range is made for use in little motor applications where active speed and torque control are necessary. For instance, packaging lines, conveyors, HVAC systems, food production, and packaging lines.
Expansion of the SMVector range has been driven by client demand and response from the global sales force. The recognition of small user-friendly drives in broad use applications to boost accuracy and cut down energy usage has inspired the requirement for a new, compact AC drive providing vector control while still permitting important cost cut down in OEM applications as well as retrofit applications.
Lenze predicts the SMVector range to enlarge the marketplace for small drives by offering sensorless vector control. Sensorless vector control is very easy to commission and function. User-friendly facia keypad and an option of onboard parameter sets make sure that the fundamental control and set-up process can be finished in seconds.
The SMVector range same features as other AC drive and Position Servo products present in the Lenze drive family. That feature is a programmable EPM chip. Fundamentally, a memory chip build-up in its own rugged plastic enclosed space, the EPM plugs straight into the facia of the drive. The removable chip permits OEM producers to copy across the whole functioning set quickly and charge the drive without turning it on.
In a Lenze product support and repair condition, a replacement EPM chip can be utilized to make the machine work again without needing the support of an engineer. Even there is no need to have skilled programming time to re-commission a single drive.
Even the drives are tough; easily recover from a complete shock load in just 0.15 seconds.
You can get the SMVector drives from CM Industry Supply Automation at the most reasonable price range. They are available in the 0.25kW to 22kW power range for single-phase and up to three-phase supplies. The normal operating method includes normal and improved V/Hz process, vector torque control, and vector speed control.
Motor calibration is done with an auto-tune function. To integrate the SMVector into a broad machine or plant control network, there are various communication options present such as Ethernet/IP DeviceNet, Profibus, RS-485, CANopen, and LECOM.
Geared motors and Lenze gearboxes are useful for wide variety of industrial applications. Lenze Gearboxes and geared motors are functionally scalable due to the modular design and high power density they have. These Lenze products have very compact kind of construction.
The variety of equipment includes industrial geared motors that have power range up to 45 kW. This power range makes them easily adaptable to the essential process parameters. It all become possible due to the lightly graduated gear transmission ratios. The Lenze gearboxes and motors high level of efficiency guarantee an optimized drive package that matches extremely high requirements.
What is Industrial Control System?
Industrial Control System also known as ICS is a group phrase used for describing a different kinds of control systems and correlated instrumentation. It includes the networks, devices, controls and systems used for operating and/or automating industrial processes.
The functioning of each Industrial Control System depends on the industry and its design to manage electronic tasks efficiently. In almost all industrial sectors and significant infrastructures, for instance, transportation, production, water treatments, and power, industrial control systems are used.
Here is the list of Industrial Control System technologies:
What are the types of Industrial Control Systems?
ICS are categorized into several types. It depends on the working and difficulty of the control action. CM Industry Supply Automation shows a list of the most popular control system used:
PLCs (Programmable Logic Controllers) - It is known as a Solid-state control system. PLCs have a user-programmable memory to store instructions and implement precise functions. Some functions include logic, I/O control, timing, three modes (PID) control, counting, arithmetic, communication, file processing, and data processing.
DCS (Distributed Control Systems) - DCS is an industrial control system that is deployed and controlled in a distributed way. That means a variety of distributed control systems or procedures are controlled independently. In DCS control is attained by intelligence instead of a centrally located single unit.
SCADA (Supervisory Control and Data Acquisition) - A generic phrase for a computerized system. It is capable to gather and process data. In addition, it is capable to apply operational controls over extensive distances. Its usual utilization includes pipeline systems, the distribution system and power transmission. SCADA was made for the exclusive communication challenges such as data integrity; delays created by the several media, which must be utilized for instance satellite, microwave, and phone lines. It is generally shared instead of dedicated.
RTUs (Remote Terminal Units) - It is a microprocessor-based electronic device used for connecting various to DCS (distributed control systems) or SCADA. RTUs are even called remote units of tele-control or remote units of telemetry. It passes input stream sensor data in the control loop to an output stream. That data is then further transmitted to the Industrial Control System centralized command.
IACS (Industrial Automation and Control Systems) - It includes safe infrastructure to permit information transfers and communications. Also, it allows smart devices to collect information. It all becomes possible with the help of sensors present on machines and machinery. IACS also include software, hardware, and communication options to change sensor information into information.
PACs (Programmable Automation Controllers) – This phrase is used loosely to describe any automation controller including higher-level instructions. The PACs are used for devices in a wide spectrum of sectors. Few of them are ICS and critical infrastructure.
IEDs (Intelligent Electronic Devices (IEDs) - IEDs is electronic component that has a microprocessor. Circuit control and regulator are a few of the Intelligent Electronic Devices. It can communicate, usually digitally using real-time ethernet, Fieldbus, or other industrial protocols.
Get all industrial automation products sales & repair services. Call us for Lenze Drive, Keb Drive, Siemens, Allen-Bradley equipment sales and repair services.
CM Industry Supply Automation are supplier and repair services provider of drives, VFD drive (variable frequency drive), VSD (variable speed drive), inverter, frequency converter, ac drive, servo drive, servo motor, industrial drives, industrial drives and controls, industrial drives and applications, high-power servomotor, high torque DC servo motor, high-power servo drives, high frequency drives, of some well-known brands that include:
Siemens Drive, Rexroth Drive, Elau Drive, Vacon Drive, Baumuller drive, Danfoss drive, Parker drive, Mitsubishi VFD drive, Sprint drive device, Allen Bradley drive, ABB drive, Rockwell VFD Drives, AB Powerflex drive, Kendrion, Intorque, Ntorq company Yaskawa drive, Fanuc drive, Weg drive, Toshiba drive, Hitachi drive, Gefran servo drive, INVT servo drive, INVT drive, INVT Servo Drive, Inovance drive & more.
Lenze, KEB, Siemens, Rexroth, Schneider Electric - Elau, Vacon, Baumuller, Danfoss, Parker, Mitsubishi, Sprint, Allen Bradley, ABB, Rockwell, Powerflex, Kendrion, Intorque, Ntorq, Yaskawa, Fanuc, Weg, Toshiba, Hitachi, Gerfan, INVT, Innovance, Bharat bijlee ,Balluf, Baumer, Bonfigilio, Contrinex, Panasonic, Heidehain, Hengsteler, Moxa, Motovario, Proface, Pilz, Pizzato, Rosemount, Helmholtz, Delta, Altivar, NIDEC, Control Technic, VLT FC, Kollmorgen, Innovance, Jetter, Crompton,HPB Motion, Techmation, Emotron,Beckhoff, Stober.
Textile control panel, Stenter Machine, Dying Machine, Merchinzer Machine, Sizing Machine, Flat Belt Machine, Rotary Printing Machine, Singing Machine, Ball Warping Machine, Indigo dyeing Machine, Rope Dyeing Machine, Weaving Sheet Dyeing Machine, Weaving sizing cooker system, Processing shrinking range machine, processing drying range machine, processing desize and mercerizing range, processing cold pad batch.
Printing machine and packaging machine control panel, rotary printing machine, flat belt printing machine, NC cutter, Corrugation Sheet Cutter, Steel Sheet cutter, Die Cutting Systems, Winders/Re-winders
Steel Control Panel, Bar Rolling Mills, Automatic Cooling Bed, Sponge Iron & Casting Applications, Flat Rolling Mill Applications, Paper & Plastic Applications, Flat Rolling Mill Applications, Flat Rolling Mill Applications, Pilger mill:
Machine tools control panel, CNC Machine, VMC Machine, Hydralic press Machine, Servo Press Machine, Automotive Machine CONTROL PANEL, Injection Molding Machine, Pipe Extrusion Machine, Wire Extrusion Machine, Wire Drawing Machine, Blow Molding Machine
Pharma machine control panel, filling machine, Blister packaging machine, Bottle labeling machine, Tablet press machine
Vision Camera, Absence/presence detection, Automated vision testing and measurement, Bar code reading, Color verification, Defect detection, Optical character recognition and verification, Part verification, Pattern matching, Sorting, Traceability, Vision guided robots
VFD Control Panel, PLC Control Panel, SCADA Control Panel, Electric Control Panel, Retrofiting solution, PCC Control, MCC Control Panel, Vision Camera, Laser Sensor, Electrolux washing machine
KEB Series Number | Lenze Series Number | Industrial Automation Blogs | Industrial Repair Services
© 2020. All rights reserved