cmindustrysupply cmindustrysupply

Leading Industrial Automation Solution Provider

Servo Drive & Motor Expert | VFD AC Drive Repair

Posted on 14th Feb 2023

The Right Guide to Choose Variable Frequency Drive


When buying a variable frequency drive, it is important to select the one that is most compatible with your system and meets your specific needs. There are a number of different VFDs on the marketplace CM Industry Supply Automation, so it is important to do your research and choose the one that will work best for you. This buying guide will help you select the right VFD for your system.

Some of the best VFD brands are:

First, you need to determine the type of VFD you need. There are three main types of VFDs: AC, DC, and servo. AC VFDs are the most common and are suitable for most applications. DC VFDs are typically used for applications that require high speed or high torque. Servo VFDs are used for applications that require very precise control, such as CNC machines.

Next, you need to determine the power rating

Choosing the best VFD for your needs can be daunting, but it's important to make sure you have the right one for the job. There are many factors to consider when choosing a VFD, such as frequency, voltage, and amperage. You'll also want to consider the size of the motor you're using and the environment it will be in.

Once you've considered all of these factors, you can start narrowing down your options. There are many reputable brands that make high-quality Variable Frequency Drive, so it's just a matter of finding the right one for your needs. With a little research, you can find the perfect VFD for your application.

In order to select the proper sized VFD, you must first determine the full load amps (FLA) of the motor being supplied by the VFD. The FLA is a rating found on the motor nameplate and is the maximum amount of current the motor will draw when it is operating at full load. Once you have determined the FLA of the motor, you can use the following formula to calculate the size of VFD required:

VFD size = (motor FLA x 1.25) / VFD efficiency

For example, if you have a motor with a FLA of 10 amps and a VFD with an efficiency of 90%, the VFD size would be calculated as follows:

VFD size = (10 amps x 1.25) / 0.9

VFD size = 11.11

When it comes to electric motor drives, there are two main types: voltage/frequency drives and vector controllers. Both have their own advantages and disadvantages, so it's important to choose the right one for your needs. Here's a quick rundown of each type of drive:

Voltage/frequency drives are the most common type of electric motor drive. They're simple to use and relatively inexpensive, making them a good choice for lower power applications. However, they're not as efficient as vector controllers and can't provide as much torque or power.

Vector controllers are more expensive than voltage/frequency drives, but they're much more efficient and can provide more torque and power. They're typically used in high-power applications such as electric vehicles. However, they're more complex to use and require more maintenance.

Users should select a variable frequency drive

Most applications do not require the full range of frequencies a Variable Frequency Drive (VFD) is capable of, therefore users should select the frequency based on the demands of the application. According to CM Industry Supply Automation, If an application only requires a VFD to operate between 1-60 Hz, there is no point in selecting a 100 Hz drive. Not only will a user be needlessly paying for extra functionality, but a VFD operating outside of its designed range will have a decreased lifespan. When selecting a VFD, users should consider the following: - The range of frequencies required by the application - The highest and lowest speeds the VFD will be required to operate at - The torque requirements at different speeds - The power rating of the VFD